Used HP 4062UX

Manufacturer:HP

Refurbished by:Allwin21 Corp

The HP4062UX Semiconductor Process Control System is the high-end system of the HP4062 Semiconductor Parametric Test System family. The HP4062UX satisfies all of the requirements of the Integrated Circuit Manufacturers for both process monitoring and process development. Since the HP4062UX uses the same mea­surement hardware as the HP4062C, it maintains the same highly accurate and reliable measurement capabilities as the HP4062C, such as high-speed measurements over a wide measurement range. For example, a typical connect-connect-force-measure sequence (resistance) measurement takes less than 17 ms, and measurements can range from 20 fA to lA and 4 ľV to 200V.
In addition to the sophisticated hardware of the HP4062C, the HP4062UX provides powerful software capabilities with the HP BASIC/UX operating environment. HP BASIC/UX combines the most powerful instrument control language. HP BASIC, with all the elements of HP-UX, the Hewlett-Packard implementation of the AT&T System V UNIX* operating system. HP Interactive Mea­surement and Analysis (IMA) Software makes measurements inter­actively by providing a softpanel user interface.

HP4062UX Process Control System Key Features:

High-speed and wide measurement range
Standard networking
Interactive Measurement and Analysis Software
Multiuser and multitasking
Multiwindowing
Offline debugger
HP4062UX Process Control System Specification:

Measurement functions:

I, V, I- V, C•G - V, C•G- t, Pulse I/V, Pulse I-V, Analog Search
Switching matrix – Number of pins (to I DUT):
12 pins to 48 pins (48-pin matrix)
24 pins to 96 pins (96-pin matrix)
Number of ports (to instrument): 9 ports (optionally 17) High-resolution source/monitor unit: 1 port

High-power source/ monitor unit: 1 port
Source/monitor units: 2 ports
Ground unit: 1 port optionally 10
Auxiliary: 4 ports
Maximum voltage at each port:
ą200V (SMU ports
ą100V (aux. ports)
Maximum current through port to pins:
ą1.6A (GNDU port)
ą1A (SMU port)

 

1 Main frames for HP4062 UX 1
2 Main frames for HP4142B 1
3 HP 41420A Source/Monitor Unit (SMU) 1
4 HP 41421B Source/Monitor Unit (SMU) 3
5 HP 4084B Switching Matrix Controller 1
6 HP 4085B Switching matrix (12-48pin) 1
7 HP series 700i Work station 1
8 HP4284(Optional) 1
9 HP Universal Low Leakage Fixture 1

We can provide the following refurbished sub-module separately.

* HP4085B Switching matrix

* HP 4084B Switching Matrix Controller

* HP 41421B Source/Monitor Unit

We can also provide the following e- test used equipment.

ˇTemptronic TP03500
ˇRucker and Kolls Model 260J Probing Station
ˇRefurbished ELECTROGLAS HORIZON 4085X
ˇSIGNATONE S-250 Probe
ˇRefurbished EG 1034
ˇRefurbished EG 2001
ˇRefurbished MP 2020
ˇRefurbished HP 4145B
ˇRefurbished HP 4062
ˇRefurbished HP 4155

ˇAW PCM/IC Software