AG Associates Heatpulse 210 Atmosphere RTA RTP

Maker:AG Associates

Condition:Refurbished and upgraded

Refurbished by:Allwin21 Corp.

AG Heatpulse210 is a rapid thermal processor which uses high-intensity, visible radiation to heat single wafer for short periods at precisely controlled temperatures. These capabilities, combined with the heating chamber's cold-wall design, superior heating uniformity,  provide significant advantages over conventional furnace processing and conventional RTP systems.    

• Ion Implant Activation

• Polysilicon Annealing

• Oxide Reflow

•  Silicide Formation

• Contact Alloying

• Oxidation and Nitridation 

Rapid thermal processing (or RTP) refers to a semiconductor manufacturing process which heats silicon wafers to high temperatures (up to 1200 C or greater) on a timescale of several seconds or less. The wafers must be brought down (temperature) slow enough however, so they do not break due to thermal shock..Such rapid heating rates are attained by high intensity lamps process. These processes are used for a wide variety of applications in semiconductor manufacturing including dopant activation, thermal oxidation, metal reflow and chemical vapor deposition.

Rapid thermal anneal (RTA) is a process used in semiconductor device fabrication which consists of heating a single wafer at a time in order to affect its electrical properties. Unique heat treatments are designed for different effects. Wafers can be heated in order to activate dopants, change film-to-film or film-to-wafer substrate interfaces, densify deposited films, change states of grown films, repair damage from ion implantation, move dopants or drive dopants from one film into another or from a film into the wafer substrate. Rapid thermal anneals are performed by equipment that heats a single wafer at a time using lamp based heating that a wafer is brought near. Unlike furnace anneals they are short in duration, processing each wafer in several minutes. Rapid thermal anneal is a subset of processes called Rapid Thermal Process (RTP).

Rapid thermal processing (RTP) provides a way to rapidly heat wafers to an elevated temperature to perform relatively short processes, typically less than 1-2 minutes long. Over the years, RTP has become essential to the manufacture of advanced semiconductors, where it is used for oxidation, annealing, silicide formation and deposition.

An RTP system heats wafers singly, using radiant energy sources controlled by a pyrometer that measures the wafer's temperature. Previous thermal processing was based on batch furnaces, where a large batch of wafers is heated in a tube. Batch furnaces are still widely used, but are more appropriate for relatively long processes of more than 10 minutes.

RTP is a flexible technology that provides fast heating and cooling to process temperatures of ~200-1250¡ãC with ramp rates typically 20-200¡ãC/sec, combined with excellent gas ambient control, allowing the creation of sophisticated multistage processes within one processing recipe. This capability to process at elevated temperatures for short time periods is crucial because advanced semiconductor fabrication requires thermal budget minimization to restrict dopant diffusion. Replacement of the slower batch processes with RTP also enables some device makers to greatly reduce manufacturing cycle time, an especially valuable benefit during yield ramps and where cycle-time minimization has economic value.

RTP systems use a variety of heating configurations, energy sources and temperature control methods. The most widespread approach involves heating the wafer using banks of tungsten-halogen lamps because these provide a convenient, efficient and fast-reacting thermal source that is easily controlled. In a typical RTP system , the wafer is heated by two banks of linear lamps ¡ª one above and one below it. The lamps are further subdivided into groups or zones that can be individually programmed with various powers to maximize temperature uniformity. In RTP, the energy sources face the wafer surfaces rather than heating its edge, as happens in a batch furnace. Thus, RTP systems can process large wafers without compromising process uniformity or ramp rates. RTP systems frequently incorporate the capability to rotate the wafer for better uniformity.

An important RTP application is the activation of ion-implanted dopants to form ultrashallow junctions. This requires fast ramp and cooling capabilities because the wafer must be heated to ~1050¡ãC to anneal out ion implantation damage and activate the implanted dopant species. However, the time at temperature must be reduced to minimize diffusion. This has led to the spike-anneal approach, where the wafer is ramped to a high temperature and then cooled immediately.

Another indispensable RTP application is in the formation of silicides. In this process, metal films react with the silicon on source/drain and gate regions to form silicides. In advanced logic processes, the metal is usually cobalt, but nickel is being explored for the 65 nm node. Silicide formation processes are usually performed at <500¡ãC, and wafers must be kept in a very pure gas ambient because metal films can be sensitive to oxidation. RTP systems are ideal, because they have small chamber volumes easily purged with high-purity gas, creating a very clean environment.

RTP is also increasingly important in oxidation applications, where the capability to use short process times at high temperatures and a wide variety of gas ambients provides excellent quality films and superior process control. RTP-grown oxides are often used for gate dielectrics, tunnel oxides and shallow-trench isolation liners. The use of steam in the gas ambient has opened new RTP applications. One of special interest for advanced DRAM technology is the use of a hydrogen-rich steam ambient for selective oxidation of gate stacks that include tungsten.

Recently, RTP-like processing has found applications in another rapidly growing field ¡ª solar cell fabrication. RTP-like processing, in which an increase in the temperature of the semiconductor sample is produced by the absorption of the optical flux, is now used for a host of solar cell fabrication steps, ncluding phosphorus diffusion for N/P junction formation and impurity gettering, hydrogen diffusion for impurity and defect passivation, and formation of screen-printed contacts using Ag-ink for the front and Al-ink for back contacts, respectively.

Some solar cell companies have successfully applied our advanced Rapid Thermal Processing (RTP) technology to its process for creating highly efficient and durable CIGS solar cells. This eliminates a key process bottleneck found in many state-of-the-art process implementations and enables the use of low-cost substrates in ways that were not considered possible before.

In Rapid Thermal Processing, a layer is heated for a very brief period only in a highly controlled way. For instance, RTP techniques can flash-heat a layer for just several picoseconds and put energy just into the top several nanometers of a layer in a highly controlled way -- while leaving the rest of the layer unaffected.

RTP has a secondary benefit of reducing the energy payback time of their solar cells to less than two months (for the full panel). By comparison, a typical silicon solar panel has an energy payback time of around three years, and a typical vacuum-deposited thin-film cell has one of 1-2 years. The energy payback time is the time that a solar panel has to be used in order to generate the amount of energy that it required to be produced.

Vacuum Rapid Thermal processing ag 210 ag2101 JIPELEC ag 610 ag2146 used-line Jipelec JetClip sg AG Heatpulse4108 ag 4108 AG Heatpulse JetStar AG Heatpulse8108 ag4100 bid service JetClip AG Heatpulse8800 AST SHS2000 AST STEAG 2800 www.ssintegration.com ag 8108 ag4108 Techlink JetClip sg Rapid Thermal Oxide ssintegration ag 4100 Jipelec JetFirst AG Heatpulse410 ag410 specequipment RLA-3108 AG 310 Mattson annealsys rapid thermal processes Jipelec JetStar heatpulse ag 2146 ssi Koyo Thermo Systems AG Heatpulse210 AST STEAG-MATTSON 2800 heat pulse Solaris Eclipse Rapid Thermal Annealing ag8800 modularpro RLA-1000 AG Heatpulse 4108 rapid thermal processor Steag AST SHS2000 Solaris 75 AG Heatpulse 8108 ag210 bidservice Solaris75 AG Heatpulse4100S STEAG Electronic Systems AG ag associates www.eng-sol.net AG Heatpulse 4100 ag 2106 Annealsys RLA-3000 Rapid thermal Anneal Engineering Solutions AG Heatpulse4100 www.annealsys.com AG Heatpulse 410 rapid thermal process eng-sol Solaris 150 AG Heatpulse 210 STEAG AG Heatpulse 310 JetFirst Rapid Thermal Annealer ag8108 AS-Master STEAG Electronic Systems Rapid Thermal Oxidation RTA RTP www.modularpro.com RTO ag 8800 Modular Process Technology Jipelec JetClip AG Heatpulse 4100S STEAG 2800 ag 2101 Solaris150 AG Heatpulse310 ag610 AS-One Solaris AG310 ag2106 AS-Micro .